1983 Bobst SP 102-CE

Max Sheet Size                      720 X 1020mm

Min Sheet Size                       350 X 400mm

Production Speed                  9,000 sheets per/hr

Pressure                                  250 tons

Elevated press

Continuous feed

Continuous delivery

Internal and external stripping

Front edge stripping

-              4 cutting chases

-              1 honeycomb chase (embossing)

-              3 x 5mm cutting plates

-              1 x 4mm compensation plate (for 1mm thin plates)

-              1 x 3mm compensation plate (for multi piece 1mm plates)

-              3 Meurer upper stripping frames

-              3 Bobst upper stripping frames

-              3 Bobst lower stripping frames

-              3 middle stripping frames (for females) with bars and clamps

-              1 set of used gripper bars

-              1 Preset stripping table

 List of all repairs completed within the last 2 to 3 years:

 •             Replaced the main motor and drive with the Bobst AC motor and drive kit.                            Installation was done by Bobst 2013.

•             Replaced the delivery pile motor with the most current Bobst upgrade 2015.

•             New gripper bars with locking reset by Bobst technician 2014.

•             New lower plate. Platen was re leveled by Bobst technician 2014.

•             Rebuilt entire mechanism for the front trim removal device 2014.

•             Rebuilt hydraulic pump unit 2014.

•             Rebuilt entire mechanism for the sheet down holder in the infeed 2014.

•             Rebuilt the side guide 2016.

•             The oil conditioner was serviced by Kool Team 2015.

•             Rebuilt Becker feeder pump this 2016

•             All electrical systems have been serviced in 2016.

Press is currently in production